Passing of Dick Snyder
Category Archives: Events
2023 Proposed Bylaw changes
2023 Proposed Bylaw Changes
Purpose and Key Issue Pros and Cons
The full text of the Bylaws, both with changes shown and the final version for approval can be viewed in the links below.
Current Bylaws with in-line edits (comparison)
Proposed Bylaws for member approval
Purpose
Bylaw changes should occur, from time to time, to keep pace with changes in policies and procedures implemented by the Board and changes in the social environment. The last time the Bylaws were changed was January 2017. Several Club policies have been implemented since then and there are certain aspects of Membership/Board behavior which have evolved (organically) since that time as well. Some new policies must be incorporated into the Bylaws as well as other changes which facilitate normal opera on of the Club.
A committee was formed to evaluate and recommend amendments. That committee consists 4 Board members, 3 of whom are Officers, including: Joe Pirozzoli (President); Duane Gall (Safety Officer); Jerry Higgins (Secretary); and, Dan Underkofler (Events Coordinator). The following amendments were unanimously approved by the Board of Directors at the August BOD meeting.
Absentee Voting
Description
The recent pandemic and other social factors have highlighted the need for the Club to allow absentee voting. Restrictions on “in‐person” meetings as well as a notable decline in Member attendance (for any number of reasons) has made reliance on physical attendance problematic. Absentee voting, with proper assurances, allows for continued, routine business without the need for physical attendance at Business meetings.
Pros
- Encourages greater Member participation
- Makes meeting a quorum much easier (and almost guaranteed)
- Provides more flexibility in case “in‐person” voting is inconvenient or unavailable (e.g. COVID pandemic, lack of venue availability, weather events, etc.)
- Gives folks that are unable to a end a means of participating in Club business (i.e. due to illness, lack of transportation, bad weather, etc.)
- Many, many other clubs successfully utilize absentee voting
Cons
- Requires extra work by certain Board members (i.e. Webmaster, etc.)
- Requires specific provisions:
- Must make voting accessible to all Members
- Must provide security (i.e. no double counting, etc.)
- Must be able to provide confidentiality (e.g. for voting that requires a secret ballot)
- Means that results may not be available immediately, or at the conclusion of a Business meeting
Reducing Number of Board Members by 2
Description
It has become readily apparent, within the last decade, that the Board may reduce its number by at least 2. A reduction of 2 (from 13 to 11) is desired in order to maintain an odd number of voting Board positions. It is virtually impossible to expect that all 13 members will attend a meeting, particularly when the Past President (PP) rarely participates, even immediately following his/her term in office. Eliminating the reliance on the PP to participate, and dropping another position is not significantly impactful nor will it be punitive to Board efficiency and function. The other position selected for removal, under this measure, is the Public Relations Director.
Pros for Removing Past President
- Historically, over the past 2 decades, the Past President (PP) has not served for more than 1 year following his/her term in office – in the majority of cases the PP does not serve at all, which compromises the ability to maintain an odd number of Board attendees
- Reduces the number of participants for each meeting (i.e. 13 is a very large number and not needed)
- Increases probability of having a full compliment of Board members at meetings
- Easier to recruit a new President because that person is no longer obligated beyond their term in office (i.e. for additional years as the PP)
- Incoming President can call upon anyone to assist with transition and advisement (including any PP’s or other former Board members)
- The incoming President can install non‐voting Board members if needed (including the PP or others)
Cons for Removing Past President
- The Past President provides some continuity for transition of power, however, this is true whether the PP is on Board or not – also, other returning Board members provide similar continuity
- The Past President is a good advisory resource, however, (again) the PP can be utilized whether officially on the Board or not
Pros for Removing Public Relations Director
- PR reports are rarely needed or even provided at every Board meeting (i.e. there are relative few PR issues that crop up throughout the year)
- This position is not critical to day‐to‐day Club operations or routine Board business
- Reduces the number of participants for each meeting (i.e. 13 is a very large number and not needed)
- Increases probability of having a full compliment of Board members at meetings
- Historically there have not been many PR Directors – IOW… the Club has previously gone without a PR Director for extended per periods of me, although not recently
- Incoming President can appoint a PR committee Chairperson or install a non‐voting PR Board member
- The City is less concerned about the “title”, than the person – IOW… the City seeks to have a reliable and responsible point of contact from the Club, and is often oblivious to their title or Board status
- It will be easier to recruit this position because it will require a lesser time commitment
Cons for Removing Public Relations Director
- If the PR Director in involved in City negotiations, having “Director” status is beneficial, however, that can be accomplished by appointing PR as a non‐voting Board member
Recent Policies or Changes to be Included in Bylaws
The following are policies which have been adopted by the Board and are proposed to be incorporated in the Bylaws:
- The Member information “Privacy Policy” (i.e. personal information will be protected and not shared)
- Formal exclusion of AMA “Park Pilot” membership for Club Members (i.e. Club Members must have “Full” or “Youth” AMA membership to meet Lease‐required liability coverage obligations)
- The policies and procedures for applying Membership Dues and Fees, to new and existing members, will be managed by the Membership Chairperson
2023 Frozen Finger Fun Fly – Report
By: Joe Pirozzoli (CD)
What a great tradition and fun contest to CD. I have to admit, I do enjoy it. I really like trying to come up with a group of events that are unique, challenging and fun. It’s really hard to come up with something that no one has ever done before. I bet I’ve participated or CD’d in at least a hundred fun fly’s. Thus, I’ve pretty much seen it all. At the same time, I’m also drawn back to a couple of favorite events that stand the test of time.
It was a typical New Year’s Day. Snow on the ground, temps in the low 40’s, a little sunshine and hardly any wind. To many of you that may sound rather miserable, but to a dozen or so die-hard’s, those are pretty good conditions. As long as there’s a little sunshine and no breeze, that’s pretty balmy here in good ole CO. I’ve flown in worse conditions for sure.
As is often the case, the challenge to having the FFFF is having the road passable and the runway plowed. That almost didn’t happen because of the 12” of snow we got 3 days prior, followed by high winds which drifted over the road that night (Thursday). Thanks to Ernie Stoos, the runway was plowed the same day it snowed. And thanks to a rather unfortunate, but fortuitous, set of circumstances the following day (Friday), the road was cleared by our good friends at Pioneer. Had it not been for the large front-end loader operator at Pioneer, the road would have been a pretty significant problem for most 2WD vehicles (and even some 4×4’s) on Sunday.
There were 11 contestants signed up for the contest. As usual, there were 3 events including a ground event and 2 flying events. The ground event this year was something completely different (and new) using an old implement. The implement was Lanny Hansen’s infamous metal ramp. This thing has been around since the 80’s. To quote Lanny… “it was designed so that a 60-sized pattern plane (with tricycle gear) could go up and over without hitting the prop”. That’s right, in those days, occasionally someone showed up to a fun fly with a ballistic pattern plane! The flying events were 2 of my old favorites, you guessed it, the “bomb drop” and “limbo”.
Back to the ground event. This year, I decided to try something new using Lanny’s old ramp… I call it the “Ski-jump”. Contestants were given 30 feet to get up a head of steam before hitting the ramp, then were required to cut the motor before hitting the ramp, and then glide as far as possible. Now that all sounds very easy… except, the darn ramp is only about 3 feet wide. Thus, it takes a little finesse to stay lined up with the ramp at a high rate of speed in order to get a good jump and glide. Results ranged from a low of just a couple of yards to the winner, Brian Gates, at 31 feet using one our Club Trainers, an “Aeroscout”. Which makes for a great story!
The bomb drop is always fun because it usually brings out some rather unique or unexpected methods for dropping the flower sack. This year, I saw something I’d never seen before… a “3D” bomb drop. Ernie Stoos pulled up into a hover right over the cross-hairs (i.e. the “X” on the ground) and managed to throw the bomb out, from a vertical position, to a winning distance of 21 feet. That was truly an amazing feat of skill!
The limbo, to me, is another great test of skill. Navigating between 2 poles and trying to sneak under a paper ribbon is both difficult and a little intimidating. You really have to know your plane, and there is very little luck involved. The process of starting high and then lowering the ribbon, tends to narrow the field to just the a few contestants that really have command of their aircraft. When we got down to the lowest level only 3 guys remained: Lanny, Ernie and Brian. Lanny prevailed, clearing a height of barely 2 feet.
Brian (who is also our CFI) showed up to fly on New Year’s Day, but not to necessarily participate the fun fly. Mike Jasiewicz, also an instructor, had crashed his FF plane the day before. As a result, Mike and Brian shared a Club Aeroscout for the FFFF. A rather creative and elegant solution. And, as luck would have it, the Aeroscout turned out to be very serviceable fun fly plane (who’d a thunk it?). I guess any plane, in the right hands, can be a deadly weapon!
Brian would go on to take 3rd in the bomb drop and tie for 2nd in the limbo, to win the coveted FFFF trophy. But, here is the really fun part… Brian had no idea that if you win the FFFF, you’re obligated to CD it the next year (gotcha). A fact, BTW, which often disincentivizes contestants from trying their hardest to win (LOL)! Brian had no such hesitations and earned his spot on the much-coveted or maligned (as the case may be) trophy.
I’d also like to give honorable mention to a new, young, up-and-comer, Landen Jekel (i.e. Rodger Barsch’s grandson). Watching Landen compete reminded me of watching Rodger’s son, Cory, about 35 years ago. They both exhibited amazing skill at a young age (it must be in the genes). Landen and Rodger also shared a plane, Rodger’s FLEX Innovations “Potenza”. Landen acquitted himself very well having only recently solo’d this past Spring. Landen is also showing some remarkable pattern skills with grandpa’s Mythos.
Photos courtesy of Darren Bryant
Sam “Salvatore” J. Catanzaro 1930 ~ 2022 (age 92)
Very sadly, another Club member (a great member and a great man), Sam Cantanzaro, passed away this month. Sam passed away on December 12, 2022 at the age of 92. Our (membership) records show that he was a member in good standing when he passed and had been a member since 1983. He was also a life member of AMA. However, I have it on very good authority that Sam was also one of the founding members of our Club, which pre-dates our current record keeping.
Sam visited the field from time-to-time with his adult children. His health prevented him from flying more recently, but he seemed to enjoy those visits nonetheless. His obituary can be found here:
https://www.horancares.com/obituary/SamSalvatore-Catanzaro
MEMORIAL MASS
Monday, January 9, 2023
11:00 AM to 12:00 PM
Spirit of Christ Catholic Church (Arvada, Colorado)
RECEPTION
Monday, January 9, 2023
12:00 PM
Spirit of Christ Catholic Church (Arvada, Colorado)
Help Wanted – Flight Instructors
Instructors Needed
Greetings! Despite the fact that we are heading into the fall, our need for flight instructors is actually
growing. We have taken on (and successfully trained) many new students this year and continue to get
new candidates. However, our long list of qualified instructors is actually, not so long.
Out of a possible 15 that have signed up and/or instructed previously, we really only have a half dozen
that are active. Each with their own limitations relating to available time and schedules. As a result,
we are currently stretched pretty thin. As such, we are looking for a few more instructors.
Instructing is a very fun and rewarding activity. There is really nothing more satisfying than watching a
person (usually a child) progress in skill and confidence as they learn to fly an RC airplane. The
transformation that occurs when they go from being very tentative and skeptical about their abilities
to a successful pilot is not only rewarding, but extremely energizing. That accomplishment will follow
them throughout their lives. They’ll remember, through experimentation and effort, the success they
achieved.
We have our own equipment. The trainers we are using today (Aeroscouts) are just about the best
airplanes we’ve ever utilized. They almost guarantee success with every student. Each student will, on
some level, be able to fly an RC airplane. This is not the traditional way we learned, but it does work
and every student will be able to achieve success.
Please consider becoming an AAM Flight Instructor. And, if you are already on our list, please consider
re-engaging with students. If interested, please contact me via the website (Chief Flight Instructor).
Thanks,
Brian Gates, CFI
Remembering James (JD) LaVasseur 1957 – 2022
Harvest Festival 2022 Open House Report
Successful Harvest Festival Open House
Despite some rather dreary weather, on Saturday 9/10, we held a very successful “Open House”. Since this event was open to the public and advertised in the Arvada Press, cancelling (for any reason) really was not an option. As such, a rather small, but enthusiastic and talented group of people made the trek to the fields and made this event a great success.
Brian Gates, our new Chief Flight Instructor, had a half dozen of our instructors and club trainers ready and waiting at the West field. Without fail, and very promptly at around 10 am (just as the rain was subsiding), he had his first customers. Others followed, and there were nearly a dozen people that took and “introductory” training flight. Thanks to Brian, Mike, Mark, Dan and John for being there and helping out. It was also nice to see our full fleet of Aeroscout trainers present and ready for service. Apologies if I forgot anyone.
The Airshow at the East field was equally successful. There may have only been a dozen or so spectators, but they were treated to a great variety of planes, heli’s and jets, and some excellent flying and static demo’s. As previously mentioned, the weather broke right around 10 am and that is when things got into gear. Each pilot took their turn with great skill and precision, providing an exciting and impressive show. Thanks again to all the guys that braved the ominous weather forecast and didn’t let us down. Many thanks to Ken, Clark, Jamie, Steve, Brian B. (who came all the way from Winter Park), Mark, Patrick, Michael K., Brian D. and our ever-present videographer Jeff. BTW… you can view much of the show on Jeff’s YouTube channel (Jeff Leasure), and please subscribe. Again, I’m sure I’m forgetting someone, but please know we are still very grateful to everyone.
Help Wanted – Field Marshall
Thank You, Bob Lenhardt
Well folks… I’d hoped this day would never come. However, at long last, Bob Lenhardt is stepping down as our Field Marshall. Bob has spent the last 7 years as our Field Marshall. His tenure has spanned 3 Presidents. He has done so with great skill, diligence and integrity. We have had many great people in this position, and Bob has distinguished himself as one of the best of the best by his superior leadership, talent and abilities. Often times, Bob did things himself in solitude and without great fanfare, but he was also very adept at massing the troops and supervising large groups with many complicated objectives. In the end, we could always count on Bob and he always delivered the goods.
I have grown very appreciative of Bob and always trusted him to do the job the right way. I also think of Bob as a good friend and fun person to be around. I hope to see Bob more frequently and enjoy flying with him in the years to come.
Thank you, Bob, and… “Job Well Done”!
Doing It Your Own Way
That being said, we need someone to fill some very big shoes. Now, I know what you are thinking… “Bob is a tough act to follow”! And, that is very true. However, you do not have to do the job the same way that Bob did it. In Bob’s own words… “it can be a position of just organizing and scheduling work and rounding up different materials for what needs to be done”. Bob did a lot of things himself because that is what he both enjoyed and was good at.
However, this job can be largely administrative. IOW… setting up and directing work parties, procuring materials, utilizing outside resources (such as Jefferson county persons required to do community service), and coordinating other Club members with different skill sets and talents.
Additionally, Bob isn’t the kind of guy to just drop everything and walk away. He’s going to continue to be around and has committed to help with the transition of a new person in this role. He has also said that he is willing to help out with different projects from time to time.
This is a very rewarding and vital Board position. That’s right, this is also a Board position. And that means it comes with a great deal of help and support from a very talented and experienced of group of folks that will support you, just as they have Bob. If you are interested in being our Field Marshall, please have a conversation with Bob and reach out to me or any other Board member.
Thanks,
Joe Pirozzoli, President
Passing of Henry “Buzz” Butler
By: Dennis Wruk
On Monday, I learned that the midair collision (of 2 full scale aircraft) south of Longmont last Saturday (9/17/2022) morning claimed the life of a longtime friend, fellow RC enthusiast and AAM member.
Henry “Buzz” Butler was flying his Sonex Xenos (N225BF) westbound from the Platte Valley airport heading towards the Longmont airport.
A flight school’s Cessna 172 (N2117Y) with a student and instructor on board were northbound from Metro airport and began maneuvering out of a left 360 turn and into a right turn to an eastbound heading when the collision occurred over Niwot. There were no survivors.
I had first met “Buzz” in the mid 1970’s when our mutual interest in building and flying R/C airplanes brought us together. At that time Buzz, had an auto painting business and he did a great job repainting two of my cars. He was a founding member of both the Arvada Associated Modelers and of the Jeffco Aeromod’lers R/C clubs. Buzz was an award-winning scale model airplane builder, a private pilot, and he finished building and painting a full scale Christen Eagle II biplane for a mutual friend of ours. Later Buzz opened a successful R/C hobby shop where he supplied his Magnum brand of model airplane fuels and Lithium Polymer batteries to model flyers across the nation. He owned and flew a Mooney M20 before acquiring the Xenos. Buzz participated in AAM Float Fly events and invited others to fly R/C floatplanes at a private lake that he had arranged permission to fly from.
From what Buzz had told me, he enjoyed flying his airplane from Platte Valley airport to Longmont on weekends to meet up with his homebuilt airplane friends. They would grill burgers, do some “Hangar Flying”, and then fly off to other airports.
I have a million good memories of Buzz as he was one of those guys that totally loved everything about building and flying airplanes.
He will be missed.